West End Precision Ltd

West End Precision Ltd page for West End Precision Ltd. Market leading UK manufacturer of precision turned parts

28/05/2026

Before any production starts, we make sure the foundation is right.

This chuck is being bored out to match the machine perfectly. It removes any rust, roughness or debris that could affect accuracy or damage parts during machining.

It’s a standard step for us because attention to detail at the start leads to higher quality finished products every time.

21/05/2026

Everyone likes seeing the finished shiny parts polished to perfection.

But this is the real work behind manufacturing.

The dirty, gritty side of production where parts actually get made. This clip shows part of the setup process on one of our machines.

Does anyone know what machine this is? Bonus points if you can identify the model!

If you need quality parts, fully manufactured here in the UK, get in touch.

14/05/2026

Need Turning?
Need Milling?
We do both!

Combining turning and milling capabilities to deliver precision engineered components with a seamless workflow.

30/04/2026

This clip showcases our Nakamura-Tome NTY³-150 triple turret platform, where three independent turrets operate simultaneously across both sides of the component. The result is a significant reduction in production time without compromising on precision or consistency.

For manufacturers focused on margin, throughput, and scalability, this kind of multi-channel machining isn’t just impressive, it directly impacts cost per part and overall operational efficiency.

If you're reviewing your current machining strategy, it’s worth considering where parallel processing could unlock measurable savings.

If you’d like to explore pricing or discuss a project, please get in touch.

We do not usually get to see this side of things.By cutting this part in half, we were able to measure internal features...
23/04/2026

We do not usually get to see this side of things.

By cutting this part in half, we were able to measure internal features much more accurately and get a clear view of what is normally hidden.

It is a simple step, but it can make a big difference when precision matters.

Also, it is just interesting to see what is going on inside.

Say hi to Matt, one of our Sliding Head Setters. He’s busy setting up the next job on our Citizen L20. Quick question fo...
09/04/2026

Say hi to Matt, one of our Sliding Head Setters.

He’s busy setting up the next job on our Citizen L20. Quick question for the expert, Can anyone tell me what he’s holding?

Not the guide bush, the other bit.
Matt calls it a “Guide Bush Assembly Clamp", but we’re fairly sure that’s a name he’s invented.

What would you call it?

02/04/2026

A look inside our multispindle section in action
This video shows stainless steel nut production running on a 1 3/4" x6 Wickman multispindle
A great example of how we handle high volume components with consistency and efficiency, keeping cycle times competitive while maintaining high quality throughout the production run.
Always happy to support our customers with projects where scale and repeatability matter.

Off-centre milled holes.Undercut relief on a turned part.Tight access, tight tolerances.This is where attention to detai...
26/03/2026

Off-centre milled holes.
Undercut relief on a turned part.
Tight access, tight tolerances.

This is where attention to detail really shows.

Features like these demand control, consistency, and a team that takes pride in getting into the difficult areas and delivering the same result every time.

It comes down to process, discipline, and care in every pass.
Because the small details carry just as much weight as the headline dimensions.

That is the standard we bring to every component.

Out of thousands of components produced for this job, these 4 are the only ones that didn’t make the cut.That level of c...
19/03/2026

Out of thousands of components produced for this job, these 4 are the only ones that didn’t make the cut.

That level of consistency is something we take real pride in, and it’s what our customers rely on.

You can spot that the grooves are nearly missing on two of them, but there are two other clear flaws in the photo as well. Curious to see who can pick them out.

It’s a good example of how tight process control and attention to detail translate into reliable, repeatable quality.

And for an extra challenge… any guesses on what these components will become once finished?

Always happy to hear your thoughts, and if you’ve got a project where quality matters, feel free to reach out for a chat.

Precision manufacturing sits at the centre of everything we do.A large share of our work involves turning bar. This appr...
12/03/2026

Precision manufacturing sits at the centre of everything we do.

A large share of our work involves turning bar. This approach delivers highly accurate, repeatable components and remains one of the most efficient ways to produce precision parts at scale.

Our capability also extends to components produced from billets and castings. Each project brings different requirements for geometry, strength, material, and volume.

That flexibility allows us to support a wide range of industries and applications.

Bar, billet, or casting, the goal remains the same.
Quality components, manufactured with care and precision.

If you are planning a new project and need a machining partner who can adapt to your requirements, our team would be glad to start the conversation.

What type of starting material works best for your components?

Address

Caddsdown Industrial Park
Bideford
EX393DX

Opening Hours

Monday 7am - 5:15pm
Tuesday 7am - 5:15pm
Wednesday 7am - 5:15pm
Thursday 7am - 5:15pm

Telephone

01237475310

Website

Alerts

Be the first to know and let us send you an email when West End Precision Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to West End Precision Ltd:

Shortcuts

Share